Wednesday 25 April 2012

Waxing Your Car By Yourself

Waxing a car is commonly performed to offer a shiny new appearance to the car, but it will also provide protection for the paint. Waxing is particularly important when the car is kept outdoors and the finish is prone to rain, snow, sun and scratches. It is recommended that you wax your car at least 2 times per year.

 what you'll need

  1.     Protective gloves
  2.     Water hose
  3.     Detergent
  4.     Bug and tar remover
  5.     Non abrasive car wax
  6.     Sponges
  7.     Towels
  8.     Soft brush
  9.     Detailing spray
Step 1 – Prepare for the Waxing

Get your supplies and make sure the sponges, towels and brushes you use are soft and clean. Otherwise, you may scratch the surface of your car. If needed, wash the towels using fabric softener. Get gloves, so that you protect your hands.

Perform the waxing in a well ventilated, shaded place. Direct sunlight may damage the wax. You may also avoid days with extreme temperatures.

Sunday 15 April 2012

Removing A Car Window Tint Yourself

Considering  the fact that some will not like the tint on their car window, i will show you how to remove the tinting should for any reason you want them off, as stated in my previous Post about Tinting Your Car Windows, It is not an easy task removing Tint also. but here are some few easy step to achieve your goal.
        If you want to remove window tint first consider the fact that most window tinting is made of two layers of tinted polyester. Sometimes when you try to pull it off the top layer comes off easily, but the second layer can be tough to get off when you want to completely remove window tint.

Step 1 – Gather the Tools
You will probably need a large plastic bag (it is best to use a large garbage bag), ammonia or all-purpose cleaner, glass cleaner, paper towels or a squeegee, steel wool and some razor blades.

Tint Your Car Windows Yourself

Tinting windows is not as easy as it looks. Even specialists find the process of tinting windows difficult.but it is achievable following this few steps

Step 1- Know the Laws of Tinting Windows
First, get to know the laws in your state regarding tinted windows. Some states do now allow black out or limo tinting because it is too dark. Other states allow dark tinting windows in the back, but not in the front of a vehicle. Auto professionals will most likely be familiar with laws concerning tinting car windows in their area.

Step 2 – Take Special Care
Before applying any material for tinting windows, make sure the surface of the window is very clean. Take special care in looking for automotive caulking compounds or weather stripping that sticks out and make sure these areas are cleaned off. If there are any areas where there are cellular phones or satellite radio antenna components on the interior of the window, they will need to be worked around.

Saturday 14 April 2012

Things To Do To A Spongy Brake Padal To Avoid Disasters

A spongy brake pedal is always a result of air in the brake line somewhere. This can be dangerous, especially if you need to break suddenly for any reason. There could be several reasons for a brake pedal to feel spongy when you step on it. Here's how you can check to find where the problem is, and correct it.

Fluid Levels
The first thing that you should check is the fluid levels. If they are low then that means that you are going to need to bleed out the brakes. The reservoir of the master cylinder needs to be filled completely. You will need to make sure that you get the right box end wrench so that you can get to the rear circuit bleeder valve. As you are doing this, you will need to get the fluid level maintained right around half full. You will need to get a transparent hose placed over your bleeder valve. The end of the hose should be submerged at the end with the clear container so that it is almost filled with brake fluid.

Thursday 12 April 2012

Safe Driving Emergency Tools

Whether you're a man or a woman, young or old, commuter or occasional driver, there are certain things that you should keep in your car at all times. You won't use these items every time you drive, but you'll be glad that they're on hand when you have a problem.
       None of these things are very expensive. Most don't take up much space in your car. There's no excuse to avoid buying these items and keeping them in easy-to-reach places on every trip.

    Fire Extinguisher. Make sure that the one you select is rated to handle all types of fires, especially electrical. You should check the extinguisher on a regular basis to make sure that it's still charged and ready to use.

    Complete Tire-Changing Setup. You'll need a lug wrench, a jack and spare tire. You should also keep a chock on hand. Even if you just use a block of wood, you'll need something to keep your car from rolling if you're forced to change a tire on an incline.
Tip: Check the air pressure in your spare tire when you check out the other four tires. Many people have flats that can’t be changed because their spare tires slowly lost air over the months and years.

    Road flares or reflective triangles. If you break down on a curve or other dangerous spot, you need to warn other drivers before they plow into your car.

    Basic first-aid kit. You should have bandages, tweezers, over-the-counter painkillers and antibiotic ointments. You can also include gauze and heat packs. Remember to update this kit as medicines and other items expire.

    Compact Shovel. If you live in an area that sees snow, you should keep a compact shovel in your trunk. This will help you dig out if you're stuck. You can find camping-style shovels at most sporting-goods stores.

    Flashlights are handy even during daylight hours. You never know when you’ll need to check something under the hood - where the sun doesn’t necessarily reach. If you're concerned about breaking down in the rain, invest in a waterproof flashlight or battery-powered torch. You should also make sure that you keep fresh batteries on hand at all times: you want the beam to be as bright as possible.

    Jump-Starting Kit. Some people have a jump-starting kit in their trunks. This standalone device jumps a dead battery without the need of another car. This is a more expensive investment than the other items on the list. However, many people find this safer and faster than waiting for a stranger to stop and offer help.

    A cell phone. Even if you don't need to call your auto club for help, you'll still feel better knowing that you have a way to get in touch with people you know.
Many cell-phone services offer emergency-only phones. You can’t call anybody you want, but you can always reach emergency contact numbers if you need them. If you can't afford a regular contract, or just don't like cell phones, this is a great option: one that keeps you safe without draining your wallet or creating a constant nuisance on your belt or in your purse.


    Empty gas can. You should never store full gas cans in your car. Instead, keep a brand-new can in the trunk. Even a one-gallon can helps you get enough fuel to reach the next gas station.

Tuesday 10 April 2012

Replace Your Brake Pad In Six (6) Easy Steps

Brake pad replacement is one of the most important aspects of motor vehicle maintenance and is a major contribution towards safe driving. Although many drivers choose to take their vehicle to a garage or service center for brake pad replacement, it is still possible to complete the job yourself, and this should be a relatively simple task for anybody with an intermediate level of mechanical knowledge.

what you'll need

  1.     Socket set and ratchet
  2.     Wheel brace
  3.     Hexagonal, torx or star-shaped keys
  4.     New pads
  5.     2 blocks of wood
  6.     Trolley jack or portable car jack
  7.     2 axle stands
  8.     A.C. clamp

Step 1: Wheel Removal

Park your vehicle on a flat, even surface and make sure that the parking brake is fully engaged. Place the wooden blocks behind the rear tires to keep the vehicle in position when it is jacked into the air. Loosen the wheel nuts but do not remove them completely.

Locate the jacking points on both sides of the vehicle and use a trolley jack or portable car jack to lift the front end of the vehicle off of the ground. Put the axle stands in place and lower your vehicle onto them. The wheel nuts can now be fully loosened and the wheels can be removed.

Friday 6 April 2012

Getting Rid Of Car Odour









It is important for any car owner to know how to get rid of car smells when they infect your vehicle. Some smells are eradicated after simple car repair; many smells emerge from a car that needs repair. However, for those foul interior smells, you may need to get your car detailed by a professional. For people who cannot afford professional car detail, you may do the work yourself by following three easy steps.

Step 1: Remove any Garbage from the Car

A lot of odor comes from forgotten garbage in your car. Take a large trash bag and completely remove all of the trash from the inside of your car before moving on to step two.

Thursday 5 April 2012

How To Change Clutch Fluid!!!

what you'll need
  •    Wrench for the bleeder screw (often 8mm, but check your owners manual)
  •    2 Bottles of brake fluid (check your owners manual for recommendations, but generally        you'll want either DOT-3 or DOT-4 fluid)
  •    Container for old fluid (an old milk jug or detergent bottle works fine)
  •    A short (approximately a foot long) length of 1/4 " (internal dimensions) clear plastic              tubing to fit over the bleeder valve
  •    A friend to pump the clutch pedal and monitor fluid level
If your clutch has been feeling a little “spongy,” like it doesn't want to full engage or disengage, a cheap and easy way to remedy the problem can be to change the hydraulic clutch fluid. Since the fluid used in clutch systems is just common brake fluid, it will slowly absorb moisture from the air, and eventually function less efficiently.
Luckily, It's a process that won't take more than an hour or so, and you don't need any expensive equipment—just a few tools and materials you'll find at any auto parts store, and a friend!

Step 1 – Locate Bleeder Valve and Attach tubing
Check your owner's manual to find the location of the bleeder valve on your clutch system. It's often located near the bottom of the clutch slave cylinder, on or near a hydraulic line leading to the cylinder. Once you've located the valve, fit the clear plastic tubing around the valve, and run it into the container you've brought.